High Quality GXP Wood Waste Wood Chips Wood Waste Industrial Hammer Mill
Product Introduction of industrial hammer mill:
The motor and rotor of this GXP industrial hammer mill installed on the same base. They are directly connected by coupling. The rotor has been checked by dynamic balance test can rotate in both of forward backward direction.
There are symmetrical operation door and safety interlock in both side. The operation doors are helpful to change the sieve plate and hammers, also helpful for checking up and debugging. Feed inlet is placed in the top of crusher which can be matched with all kind of feed equipment. There is one piece of sieve plate installed at the bottom of GXP industrial hammer mill. The size of crushed material could be changed by changing different sieve plate with different hole. Normally, the finished size is from 2mm to 30mm adjustable. Spare parts of hammers and sieve plate are made by our CNC system, through high technical heat treatment.
The GXP industrial hammer mill for sale has reasonable structure, sturdy and durable using, safety and dependable, simple installation, easy operation, tiny vibrating, high efficiency etc. advantages, which is the most ideal grinding equipment of all kinds of wood chips, wood shavings, grass, straw, stalk, corn, weeds, soybean, PVC foaming board, rubber and so on.
Mainly Parameters of industrial hammer mill:
| Model | GXP65*27 | GXP65*55 | GXP65*75 | GXP65*100 | GXP80*100 |
| Diameter of rotor(mm) | 650 | 650 | 650 | 650 | 800 |
| Width of studio(mm) | 275 | 550 | 750 | 1000 | 1000 |
| Rotate speed (r/min) | 2950 | 2950 | 2950 | 1480 | 1480 |
| Spec of screener(mm) | 1340×270 | 1340×400 | 1340×600 | 2730×600 | 2730×600 |
| Spec of hammer(mm) | 180×50×5 | 180×50×5 | 180×50×5 | 180×50×5 | 180×50×5 |
| Qty of hammer(pie) | 24 | 48 | 72 | 96 | 96 |
| Related power(kw) | 22 | 55 | 75 | 90/110 | 132/160 |
| Output(t/h) | 0.5-1 | 1-2 | 2-3 | 3-4/3-5 | 4-6/5-8 |
Product Photos of industrial hammer mill:
